ALFA LAVAL MAB 206 CENTRIFUGE

ALFA LAVAL MAB 206

AL-TECH CENTRIFUGES offers you Reconditioned Alfa Laval separator, solid wall disc centrifuge, model MAB 206 S-24. The unit is equipped with a 7.5 HP motor drive, is set up as a three-way separator.

REFURBISHED ALFA LAVAL MAB-206 SOILD BOWL CENTRIFUGE FOR LUBE OIL, HYDRAULICS OIL, ENGINE OIL, TRANSFORMER OIL, BIODIESEL

• 
  APPLICATIONS: The MAB 206 is a solids-retaining centrifuge in clarifier or purifier execution. It is used for separating mineral oils such as (fuel and lubricating oils, hydraulic, running in and metal working oils).
  
  WORKING PRINCIPLE: The feed is introduced to the rotating centrifuge bowl from the top and is accelerated in a distributor (2)before entering the disc stack . It is between the discs that the separation takes place.The water and the heavier solids are forced towards the bowl wall where the solids accumulate and the water proceeds over the top disc to an open outlet
  
  CLARIFIER VERSION:
  The light phase moves towards the centre and leaves the bowl through a paring disc.The machine needs to be stopped at intervals for manual removal of the solids. The bowl is mounted on a vertical spindle driven by a horizontally mounted motor, via a worm gear.
  
  We recondition machine and replace the following parts with New / Unused parts, such as...
  
  1. Bowl Spindle
  2. Worm Wheel Shaft
  3. Worm & Worm wheel
  4. Bearing Housing
  5. Bottom Bush
  6. All Seal Rings, Gaskets, Springs, Bearings.
  
  Machine is painted as per OEM norms with Epoxy paint.
• Machine Application:
  The MAB 206 high speed disc stack centrifuge is designed for purification or clarification of fuel oils, engine oils, lubricating oils, and various mineral oils used on board marine installations and in industrial applications.
  
  STANDARD EQUIPMENT:
  MAB 206 centrifugal separator
  Feed pump with fittings
  Motor - 440 volt, 60 Hz, 3-phase or 380V/50Hz
  Complete set of gravity disks
  Water supply device
  Complete set of tools
  Set of instruction manuals
  
    alfa laval oil purifier, industrial centrifuge, used centrifuge, fuel oil separator, waste oil purifier, wvo centrifuge, oil purifier, biodiesel centrifuge, industrial centrifuge, centrifuge parts, laval centrifuge, alfa laval centrifuge, ship oil purifier, engine oil purifier, diesel oil purifier, Marine oil purifiers industrial centrifuges, alfa laval separators, disc centrifuge, waste oil centrifuge, westfalia centrifuge, centrifugal separator, alfa laval parts, alfa laval centrifuges, biodiesel centrifuges, centrifuge price, reconditioned oil purifier, centrifuge equipment, centrifuge machine, alfa centrifuge, disk centrifuge, reconditioned centrifuges, used industrial centrifuge

TECHNICAL DATA SHEET MAB 206     CAPACITIES MAXIMUM RATED CAPACITY MINIMUM / MAXIMUM TEMPERATURES Distillate Viscosity 1.5 - 5.5 cSt/40°C (104°F)     10,600 L/H   30°F / 212°F   9,900 L/H   Steam Turbine @ 70°C Maximum density of oil 991 kg/m3 at 15°C   Sludge Holding Space Drive Motor (Direct Drive) Gear Case Oil   Operating Water for Sealing Max chloride content of 60 PPM 7,800 L/H       3.44 litres   7.5 KW   4 liters     200-400 kpa   SPEED The maximum speed of the spindle must not be exceeded.   Drive motor Bowl Spindle Run up time Run down time   1750 RPM   8425 RPM   Approx. 2 minutes   Approx. 3 minutes Materials Frame: cast iron (epoxy enamel) Covers: silumin Bowl Components Bowl body, hood, disc stack, pairing disc: stainless steel Sludge basket: stainless steel Special materials Specific materials can be used in bowl components and must be specified at time of order.   Unit is shipped with all necessary bowl insertion tools, mounting isolators, built-on feed pump and motor. Shipping Data Centrifuge with tools, motor, built-on feed pump     520kg

 

For any other information and queries Contact us :

sales@al-tech.in

altechcentrifuges@gmail.com

www.al-tech.in

MO : +919974652315 

          +919909207600